Load data for .38-45 ACP + .358 | 150gr | LEE Mold 358-150-1R

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.358 \| 150gr \| LEE Mold 358-150-1R
Manufacturer SKU:	358-150-1R
Bullet Weight:	150gr \| 9.7g
Bullet Diameter:	0.358" \| 9.09mm
Bullet Length:	0.619" \| 15.7mm
Caliber:	.38-45 ACP load data
Case Length (l3):	0.898" \| 22.8mm
Cartridge Length (C.O.L.):	1.229" \| 31.2mm
Seated Depth:	0.288" \| 7.3mm
Shank Seated Depth:	0.288" \| 7.3mm
Case Capacity:	22.0 Grains of Water \| 1.43 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	34084 psi \| 2350 bar
LID:	LID_B3277_C596
Last updated:	2025-01-01

Load data for 96 loads in caliber .38-45 ACP with .358 | 150gr | LEE Mold 358-150-1R bullet and 48 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	91%	28195	83%	**40	96%
ADI AP 70N	<<locked>>	64%	30240	89%	**81	100%
ADI APS 350	<<locked>>	67%	29689	87%	**01	100%
ADI APS 450	<<locked>>	66%	27543	81%	**07	100%
ADI AS 30	<<locked>>	71%	29312	86%	**70	100%
ADI AS 50N	<<locked>>	68%	29863	88%	**19	100%
Accurate No. 2	<<locked>>	70%	29950	88%	**88	100%
[Accurate No. 7]*	<<locked>>	74%	29167	86%	**12	88%
Accurate Solo 1000	<<locked>>	70%	29544	87%	**99	100%
Accurate Solo 1250	<<locked>>	76%	29921	88%	**58	100%
[Accurate TCM]*	<<locked>>	83%	29907	88%	**99	83%
[Alliant BLUE DOT]*	<<locked>>	95%	29631	87%	**99	87%
Alliant BULLSEYE	<<locked>>	67%	30269	89%	**27	100%
Alliant POWER PISTOL	<<locked>>	78%	30574	90%	**19	96%
Alliant UNIQUE	<<locked>>	76%	29225	86%	**17	100%
Baschieri & Pellagri 100	<<locked>>	72%	30124	88%	**12	100%
Hodgdon Clays	<<locked>>	67%	30255	89%	**14	100%
Hodgdon HS-6 👍	<<locked>>	63%	30008	88%	**57	99%
Hodgdon Universal	<<locked>>	71%	30240	89%	**81	100%
Hodgdon TrailBoss	<<locked>>	95%	13111	38%	**7	100%
[Lovex D037.1]*	<<locked>>	74%	29167	86%	**12	88%
Lovex S020	<<locked>>	70%	30400	89%	**01	100%
Maxam CSB 1	<<locked>>	77%	28065	82%	**32	100%
Maxam CSB 2	<<locked>>	77%	29965	88%	**65	100%
Maxam CSB 3	<<locked>>	73%	29327	86%	**29	100%
Maxam CSB 4	<<locked>>	69%	28094	82%	**89	100%
Maxam CSB 5	<<locked>>	65%	28718	84%	**53	100%
ReloadSwiss RS 12	<<locked>>	65%	28442	83%	**32	100%
ReloadSwiss RS 14	<<locked>>	93%	11168	33%	**4	100%
ReloadSwiss RS 20	<<locked>>	78%	29631	87%	**20	100%
ReloadSwiss RS 24	<<locked>>	79%	28776	84%	**83	90%
Rottweil P 806	<<locked>>	87%	29530	87%	**39	100%
SNPE Vectan A0	<<locked>>	78%	29414	86%	**78	100%
SNPE Vectan BA 9	<<locked>>	71%	29530	87%	**55	100%
SNPE Vectan BA7 1/2	<<locked>>	85%	30560	90%	**47	100%
SNPE Vectan BA9 1/2	<<locked>>	72%	29718	87%	**61	100%
[Shooters World Major Pistol]*	<<locked>>	74%	29167	86%	**12	88%
Somchem MP200	<<locked>>	70%	29095	85%	**11	100%
Somchem MS200	<<locked>>	75%	30197	89%	**01	100%
Somchem S221	<<locked>>	68%	30298	89%	**93	94%
Vihtavuori 3N37 👍	<<locked>>	78%	29776	87%	**57	100%
Vihtavuori 3N38	<<locked>>	89%	28282	83%	**70	91%
Vihtavuori N105	<<locked>>	96%	26368	77%	**99	94%
Vihtavuori N320	<<locked>>	68%	28572	84%	**06	100%
Vihtavuori N32C Tin Star	<<locked>>	94%	29037	85%	**50	100%
Vihtavuori N330	<<locked>>	72%	29747	87%	**75	100%
Vihtavuori N340	<<locked>>	74%	28485	84%	**84	100%
Vihtavuori N350	<<locked>>	80%	28427	83%	**34	100%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AP 100]*	<<locked>>	61%	12067	35%	**6	81%
ADI AP 70N	<<locked>>	61%	27267	80%	**45	100%
ADI APS 350	<<locked>>	62%	26455	78%	**8	100%
ADI APS 450	<<locked>>	61%	24656	72%	**5	100%
ADI AS 30	<<locked>>	62%	23235	68%	**8	100%
ADI AS 50N	<<locked>>	61%	23975	70%	**43	100%
Accurate No. 2	<<locked>>	60%	21248	62%	**60	100%
[Accurate No. 7]*	<<locked>>	66%	20914	61%	**58	82%
Accurate Solo 1000	<<locked>>	62%	23728	70%	**20	100%
Accurate Solo 1250	<<locked>>	61%	19131	56%	**04	100%
[Accurate TCM]*	<<locked>>	78%	25585	75%	**34	80%
[Alliant BLUE DOT]*	<<locked>>	84%	21524	63%	**52	81%
Alliant BULLSEYE	<<locked>>	60%	24584	72%	**38	100%
[Alliant POWER PISTOL]*	<<locked>>	60%	17608	52%	**66	88%
Alliant UNIQUE	<<locked>>	62%	19406	57%	**60	100%
Baschieri & Pellagri 100	<<locked>>	61%	21611	63%	**01	100%
Hodgdon Clays	<<locked>>	62%	26861	79%	**4	100%
Hodgdon HS-6	<<locked>>	61%	27586	81%	**17	98%
Hodgdon Universal	<<locked>>	60%	22133	65%	**63	100%
Hodgdon TrailBoss	<<locked>>	68%	7252	21%	**9	100%
[Lovex D037.1]*	<<locked>>	66%	20914	61%	**58	82%
Lovex S020	<<locked>>	61%	21988	65%	**79	100%
Maxam CSB 1	<<locked>>	62%	18333	54%	**4	100%
Maxam CSB 2	<<locked>>	62%	19276	57%	**14	100%
Maxam CSB 3	<<locked>>	61%	21045	62%	**10	100%
Maxam CSB 4	<<locked>>	60%	22365	66%	**10	100%
Maxam CSB 5	<<locked>>	61%	25556	75%	**14	100%
ReloadSwiss RS 12	<<locked>>	61%	25498	75%	**93	100%
ReloadSwiss RS 14	<<locked>>	73%	7368	22%	**2	99%
ReloadSwiss RS 20	<<locked>>	61%	17390	51%	**27	100%
[ReloadSwiss RS 24]*	<<locked>>	64%	17289	51%	**60	81%
[Rottweil P 806]*	<<locked>>	62%	11327	33%	**5	86%
SNPE Vectan A0	<<locked>>	60%	17840	52%	**1	99%
SNPE Vectan BA 9	<<locked>>	61%	22017	65%	**47	100%
SNPE Vectan BA7 1/2	<<locked>>	61%	14779	43%	**8	91%
SNPE Vectan BA9 1/2	<<locked>>	62%	21930	64%	**53	100%
[Shooters World Major Pistol]*	<<locked>>	66%	20914	61%	**58	82%
Somchem MP200	<<locked>>	60%	21683	64%	**93	100%
Somchem MS200	<<locked>>	61%	20204	59%	**47	100%
Somchem S221	<<locked>>	61%	23844	70%	**81	90%
Vihtavuori 3N37	<<locked>>	61%	16766	49%	**27	95%
[Vihtavuori 3N38]*	<<locked>>	73%	16708	49%	**40	81%
[Vihtavuori N105]*	<<locked>>	76%	13808	41%	**07	81%
Vihtavuori N320	<<locked>>	60%	22611	66%	**24	100%
Vihtavuori N32C Tin Star	<<locked>>	62%	13184	39%	**4	100%
Vihtavuori N330	<<locked>>	61%	21306	62%	**60	100%
Vihtavuori N340	<<locked>>	60%	18536	54%	**24	100%
Vihtavuori N350	<<locked>>	61%	15534	46%	**1	94%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data